Product information
TSA4040V
Specification
| Size of the chuck upper surface (length×width) | mm | 400×400 |
| Longitudinal travel of table | mm | 750 |
| Vertical displacement of wheel axis:front to back | mm | 800 |
| Vertical displacement of wheel axis:up and down | mm | 200 |
| Size of wheel (O.D.×thickness×I.D.) | mm |  200×70×50 |
| AC spindle motor power for wheel axis | kW | 3.7 |
| Revolution of wheel(inverter control) | mln-1 | MAX.5,000 |
| Foot space size | mm | 約2,500×2,680 |
| Mass of basic unit | kg | 約3,500 |
Process
Grinding
Work piece
Circumferential chamfering grinding of quartz glass
Feature
- This equipment is NC controlled special-purpose machine that can perform circumferential chamfering grinding of quartz glass based on large slicing machine. By installing a linear guide for each guide of table movement from side to side (X-axis), wheel movement back and forth (Y-axis), and vertical wheel movement (Z-axis), the machine performs contour grinding, circumferential grinding and chamfering using simultaneous control in driving axes. By setting wheel axis to standing axis, and using a wheel in which different size numbers of grinding grains (rough: #200 to #400, finish: #700 to #1000) are imbedded, the machine performs orocessing from rough grinding to finish grinding with one chuck. By using autoloader and stocker, a limited unattended operation is possible.